Using Microseismicity to Understand Subsurface Fracture Systems and Increase the Effectiveness of Completions: Eagle Ford Shale, TX

Abstract

Existing natural fractures often have a significant impact on both stimulation and production of oil and gas wells. Effective exploitation of unconventional reservoirs requires the understanding of the local tectonic history and the present day stress regime. Signal strength, high quality reflection seismic, microseismic imaging, and moderate structural complexity of the liquids-rich gas and tight oil Eagle Ford shale makes it an ideal place to study hydraulic fracturing in tight rocks. Microseismic monitoring results showed clear structural trends relating to reactivation of existing faults and fractures, and rock failure mechanisms. These results provided critical information to the operator for optimizing the hydraulic fracture design. Microseismic data collected using a surface array allowed the full geometry of the result to be viewed with no directional bias. The geometry of the microseismicity trends related to fracturing developed during the stimulation treatment were representative of the true geometry of the structure. The large aperture and wide azimuth of the monitoring array facilitated the determination of source mechanisms from every event detected, which provided full coverage of the focal sphere of each source mechanism. The events identified two different source mechanisms, indicating a different failure mechanism for fractures than for reactivated faults. Microseismicity with a NE-SW trend are interpreted to be related to induced or reactivated fractures. Microseismicity also formed contiguous trends across multiple wellbores in a ENE-WSW direction. These trends are interpreted to be the result of fault reactivation. Source mechanisms from faulting parallel to SHmax have failure planes striking NE-SW with normal dip-slip failure on steeply-dipping planes. Those from fault reactivation have strike-slip failure on ENE-WSW striking failure planes. The orientations of the fault-related trends parallel extensional Gulf of Mexico growth faulting. The microseismicity trends associated with fracturing are at approximately 25o to the faulting trends. The operator combines treatment pump parameters for the wells with the structural understanding gained from the analysis of fracture trends and source mechanisms to identify zones that should be avoided in subsequent treatments. Mapped microseismicity provides critical information for modification of well spacing for subsequent wells, optimizing the completion plan and cutting costs.

AAPG Datapages/Search and Discovery Article #90193 © 2014 Rocky Mountain Section AAPG Annual Meeting, Denver, Colorado, July 20-22, 2014