--> Diagenesis of Jauf Sandstone in Hawiyah Area

Datapages, Inc.Print this page

Diagenesis of Jauf Sandstone in Hawiyah Area, Saudi Arabia

By

 Khalid A. Al-Ramadan1, Badrul Imam1, Mahbub Hussain2, Salih Saner1

(1) King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia (2) King Fahd Uneversity of Petroleum and Minerals, Dhahran, Saudi Arabia

 Jauf Formation of Lower Devonian age is an important hydrocarbon reservoir in Saudi Arabia. The sandstone reservoirs of Jauf Formation are mostly fine to medium-grained, moderately to well-sorted and texturally mature quartz arenites. Average composition of the framework grains of the sandstone reservoirs of Jauf Formation is 77% quartz, 2 % feldspar and 0.1% rock fragments. Major authigenic cements include calcite; chlorite, illite and quartz while minor amount of pyrite and illite/smectite clay are present. The diagenetic processes include compaction, cementation and dissolution. The degree of compaction is evidenced by long, concavo-convex and sutured contacts. Cementations include an early calcite cementation phase followed by clay coatings (chlorite and illite), quartz overgrowths cementation and late calcite cementation. In addition, some minor pyrite cementation has occurred in early stage of burial. Early-calcite cement is poikilotopic and has occupied most of the pore spaces in some samples reducing the primary porosity. Chlorite pore fillings and grain coatings have reduced both the porosity and permeability to some extent but also have helped to retain initial porosity at depths by retarding the development of quartz overgrowths. Illite cement is most commonly found as hair-like growth coating the grains and bridging pore throats. This reduces the permeability dramatically. Quartz overgrowths have reduced the porosity and permeability significantly. The late-calcite cement does not have a profound effect on the samples. The invasions of acidic fluids have resulted in partial dissolution of calcite cements and feldspar grains creating secondary porosity in many samples.