--> Drilling & completion

Datapages, Inc.Print this page

Table 11: Drilling and Completion

FIELD

SURFCASFT

CASPGMFTM

DRILLINGM

BITPROGRA

HIGHPRESZO

Eugene Island Block 330

3600.0000

Wells TD within normal pressure (through MG sands)--26" at 465 ft, 16" at 850 ft, 10 3/4" at 3600 ft, 7 5/8" at 7700 ft. (See High Pressure Zones.)

Seawater gel to 3600 ft, lignosulfate 3600 ft to TD.

Typical bit: sealed bearing, milled-tooth rock bit.

NH through OI sands (approx. 7500 ft down). Casing: 26" at 465 ft, 20" at 850 ft, 13 3/8" at 3600 ft, 9 5/8" at 6800 ft, 7" at 7400 ft.

 

 

FIELD

INTSPERF

WELLTREAT

LOGGINGSU

TESTINGPR

MUDLOGTECH

Eugene Island Block 330

GA, HB, JD, KE, LF, MG, and OI are the major reservoirs.

Retarded mud acid treatment as needed for formation damage.

Induction electric logs (SP, GR, resistivity) + sonic, FDC-CNL, dipmeter, sidewall cores.

Routine wireline sidewall cores; drill-stem testing in major sands; conventional coring in selected wells & intervals; pressure transient analysis.

Surface to TD: monitor total gas, rate of penetration, pressure, chlorides, & shale densities; catch cuttings, gas chromatography.