--> --> Figure 3. Wave-test data acquired with d = 20 feet (six meters) after a 12-Hz low-cut filter is applied and a running sum of 11 adjacent traces is calculated to simulate data that would be acquired with an inline receiver array spanning 220 feet (67 meters).

Datapages, Inc.Print this page

Figure 3. Wave-test data acquired with d = 20 feet (six meters) after a 12-Hz low-cut filter is applied and a running sum of 11 adjacent traces is calculated to simulate data that would be acquired with an inline receiver array spanning 220 feet (67 meters). Hard evidence now has been produced that defines the receiver patch dimension (220 feet) that should be used at each receiver station to optimize data quality.