Print this page
Click to view article in PDF format.
Ultra-High Resolution 3-D Characterization of Deep-Water Deposits-I:
A New Approach to Understanding the Stratigraphic Evolution of Intra-Slope Depositional Systems*
By
R.T. Beaubouef, V. Abreu, and N.L. Adair
Search and Discovery Article #40084 (2003)
ExxonMobil Exploration Co., 233 Benmar, Houston, TX, 77060, 281-654-5018 ([email protected])
*Adapted from "extended abstract" of poster session presentation at AAPG Annual Meeting, May 14, 2003, Salt Lake City, Utah.
NOTE: This is the fourth of six presentations on the general subject of the shapes of siliciclastic sedimentary bodies presented by this group of ExxonMobil researchers under the leadership of John C. Van Wagoner. Click to view a list of all these articles.
Advances in our understanding of siliciclastic deposition in deep-marine settings has occurred through the collection and interpretation of a variety of data sets from modern and ancient (outcrop and subsurface) depositional systems, laboratory experiments, and numerical modeling. Research on deep-water sandstones within the petroleum industry has traditionally relied on interpretation of subsurface systems with conventional exploration data (2D and 3D seismic, well logs, cores) and descriptions of outcrops of ancient systems. More recently, use of experimental and numerical modeling is on the rise (e.g. Hoyal et al., 2003). Work in each sub-discipline has yielded significant results in the areas of stratigraphic, facies, sediment transport and deposition models of deep-water sandstones. However, there are many limitations to these data sets and results. Fundamental questions remain about how to best integrate and utilize these results to develop a comprehensive understanding of deep-water deposition. Most of the difficulties result from the disparate nature of the data types and the differences in scale and resolution of the observations being made. It has been long recognized that study of latest Pleistocene and modern systems provides important clues for understanding of deep-water reservoirs. In the past few years, geotechnical developments have produced an opportunity to study late Pleistocene deep-water deposits in a new way. High-resolution, shallow imaging 3D seismic techniques can provide near outcrop-scale stratigraphic information in 3D. New rotary borehole drilling systems designed for collecting continuous cores within the first few hundred meters below the sea floor are now available commercially. As part of an ExxonMobil research project we have designed and executed a field program to take advantage of this technology in the East Breaks area of the western Gulf of Mexico (Figure 1).
|
uThe East Breaks deep-water program uStratigraphic evolution of basin fill uPreliminary numerical modeling results
uThe East Breaks deep-water program uStratigraphic evolution of basin fill uPreliminary numerical modeling results
uThe East Breaks deep-water program uStratigraphic evolution of basin fill uPreliminary numerical modeling results
uThe East Breaks deep-water program uStratigraphic evolution of basin fill uPreliminary numerical modeling results
uThe East Breaks deep-water program uStratigraphic evolution of basin fill uPreliminary numerical modeling results
|
The East Breaks Deep-Water Program The survey area selected is an intra-slope basin located within the Texas continental slope in approximately 1500-m water depth (Figure 1). The basin represents the terminal portion (Basin 4) of a well-known chain of four Pleistocene intra-slope basins often referred to as the Brazos-Trinity Intra-Slope System. The program was designed to occur in two phases. The first phase, conducted in 2001, included the acquisition of a large (200 km2, 14 OCS blocks), short-offset (100m, 6 cable array), ultra-high resolution (200 Hz peak frequency, 20-750 Hz bandwidth) 3D seismic survey (EBHR3D). A 30 in3 air gun source was used. The data have a 0.5 ms sample rate and trace spacing is 6.25 meters. Vertical resolution is estimated at 1-2 meters and imaging of the approximately 250 m of basin fill is excellent (Figure 2). The second phase is designed to ''ground-truth'' the seismic data through coring and logging of the upper levels of basin fill and is not presented here. Stratigraphic Evolution of Basin Fill; Contrasting Reservoir Styles Based upon previous
research on this portion of the slope, the fills of these basins generally
exhibit a three step evolution including, in chronological order: a) a
''ponded'' fill stage, b) a ''perched'' fill stage, c) a complete bypass stage
(Beaubouef and Friedmann, 2000). These phases in basin filling and spilling and
are associated with an evolving accommodation profile as each basin is filled
with sediment. Early in its history the basin effectively acts as a pond and
deposition is limited to the deepest portions of the bathymetric depression.
Ultimately, as the basin continues to fill accommodation decreases and the basin
enters the perched slope-filling phase. At this time, the depositional profile
is more like a ramp and deposition is offset from the initial basin center and
occurs close to the feeder channel. Deposition in Basin 4 was arrested in the
perched stage of filling and there has been no bypass or significant
post-depositional erosion of the basin fill. Therefore, a complete depositional
record of basin filling can be evaluated. In this presentation we will focus on
the contrasting reservoir styles that occur during this evolution. In
particular, we will highlight the differences between sand-rich units deposited
during the ''ponded'' and ''perched'' phases of basin filling (high amplitude
units in Figure 2). We observe a change from the older, flat-lying, onlapping
sequences (ponded), to the basinward tapering wedge of the uppermost unit
(perched) that downlaps the older sequences. The difference between these
deposits includes their: 1) positions and extents within the basin, 2) external
form and map patterns, 3) stacking patterns and 4) internal architectures
(Figure 3). The ponded units are best described as confined sheet complexes.
They are restricted to the deepest portion of the basin and exhibit ''bullseye''
isochron patterns. They have uniform seismic amplitude characteristics,
reflection continuity suggests they are comprised of layered sheets and no
channels are observed within them. Stacking patterns appear aggradational. To
varying degrees these units have been truncated by younger mass transport
complexes. By contrast, the perched unit (the ''Upper Fan'') is aerially
widespread, exhibits a fan-like map pattern and contains extensive channel
systems (Beaubouef et al., 2003). Strong down-and across-fan seismic facies
variations indicate significant lithofacies changes and are accompanied by rapid
thickness changes. Additionally, the upper fan shows a progradational
depositional pattern. A stratigraphic evolution occurs in which early sheet-like
deposition gives way to progressively more channelized facies as the system(s)
build basinward. This progradation occurs through the successive off-lap of
lobate packages and is associated with the extension of a distributary network
of channels into the basin. At the mouths of the distributaries we find channel
terminus lobes that resemble those found in river deltas in many ways (Beaubouef
et al., 2003). They exhibit a stratigraphic evolution similar to that
observed for the entire fan, but at a much smaller scale. These lobes are of
Preliminary Numerical Modeling Results The three dimensional
behavior turbidity flows over the seismically defined bases of the perched and
ponded deposits was modeled numerically (Figure 4). For both cases, the turbidity flow was
assumed to have medium concentration (5%) and a height of 48 m, based on the
levee height near the inlet. An inlet The primary difference
between the perched and ponded cases is the rate at which the turbidity flow
decelerates. Because of the high slope of the ponded case, the flow accelerates
downstream of the inlet. Furthermore, the flow does not decelerate significantly
until the flow interacts with the high adverse slope at the end of the basin. In
this case, a hydraulic jump forms at the distal end of the basin and migrates
nearly half way up the inlet slope. Even though a hydraulic jump forms in this
case, velocities are maintained downstream of the jump. In the perched case, a
shorter and much gentler slope results in significant flow deceleration prior to
the slope break. A hydraulic jump forms at the slope break that rapidly
decelerates the flow. The combined effects of further flow expansion and
friction rapidly reduce this
From the seismic data we observe distinctly different reservoir styles between the ponded and perched fill. From the numerical modeling we observe differing behavior of the same turbidity current simulated for the ponded and perched cases. Although preliminary, the results of this study combined with those of previous studies point out that there are both extrinsic and intrinsic controls on the stratigraphic evolution in confined slope basins. The extrinsic controls (related to shelf edge delivery systems) affect the types, volumes and frequencies of sediment gravity flows entering a basin. The intrinsic controls (bathymetry, accommodation profiles) affect the positions, extents, and stacking patterns of depositional sequences. Importantly, both types of controls can impact internal architecture of turbidite reservoir units within the sequences.
Beaubouef, R.T., Van Wagoner, J.C., and N.L. Adair, 2003, Ultra-high resolution 3-D characterization of deep-water deposits- II: Insights into the evolution of a submarine fan and comparisons with river deltas: Search and Discovery Article #40084. Beaubouef, R.T., and S.J. Friedmann, 2000, High Resolution Seismic/Sequence Stratigraphic Framework for the Evolution of Pleistocene Intra-Slope Basins, Western Gulf of Mexico: Depositional Models and Reservoir Analogs, Deep-Water Reservoirs of the World, Gulf Coast SEPM. Hoyal, D.C.J.D., J.C. Van Wagoner, N.L. Adair, M. Deffenbaugh, D. Li, T. Sun, C. Huh, and D.E. Giffin, 2003, Sedimentation from jets: A depositional model for clastic deposits of all scales and environments: Search and Discovery Article #40081. |
Figure 1. Maps showing
late Pleistocene paleo-geography and depositional setting of study area (Basin
4).
Figure 2. Dip-oriented
seismic line from EBHR3D illustrating ''Ponded'' and ''Perched'' fill units.
Figure 3. Maps showing
illustrating differences between ''Ponded'' and ''Perched'' basin filling units.
Figure 4. Preliminary
results of numerical modeling for turbidity current flow in the ''Ponded'' and
''Perched'' cases.
