--> Interpreting Magnetic Data, Dale Bird, Search and Discovery Article #40022 (2001)
[First Hit]

Datapages, Inc.Print this page

  Click to view this article in PDF format.

Status of Previous HitBoreholeNext Hit Gravity*

By David A. Chapin1 and Mark E. Ander1

Search and Discovery Article #40043 (2002)

*Adapted for online presentation from an article by the same authors in AAPG Explorer (February, 1999), entitled “Previous HitBoreholeNext Hit Gravity: An Old Technique with New Life.” Appreciation is expressed to the author and to M. Ray Thomasson, former Chairman of the AAPG Geophysical Integration Committee, and Larry Nation, AAPG Communications Director, for their support of this online version.

1LaCoste & Romberg, Austin, Texas [email protected]; [email protected]).

 

tFigure Captions

tGeneral statement

tTool, resolution

tResolution examples

tCurrent & future use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tFigure Captions

tGeneral statement

tTool, resolution

tResolution examples

tCurrent & future use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tFigure Captions

tGeneral statement

tTool, resolution

tResolution examples

tCurrent & future use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tFigure Captions

tGeneral statement

tTool, resolution

tResolution examples

tCurrent & future use

 

 

 

 

 

 

 

 

 

 

Figure Captions

Figure 1: A schematic of the Previous HitboreholeNext Hit gravity logging tool.

 

 

Figure 2: A model of the distance sensitivity of Previous HitboreholeNext Hit gravity.(courtesy of L.A. Beyer, adapted from A.K. Shultz).

 

Figure 3: Gas coning models around producing wells.

 

Figure 4:  Measured Previous HitboreholeNext Hit gravity logs from the Cannae #1 well, East Texas (courtesy of D.G. Ziegler and Broughton Operating Corporation).

 

 

 

Return to top.

General Statement

Previous HitBoreholeNext Hit gravity is a density logging method that has been available for over 30 years – yet today it is a seldom-used technique, even though there are numerous published case studies that demonstrate its value. By one estimate, it is thought that Previous HitboreholeNext Hit gravity has directly or indirectly contributed to the cumulative discovery of more than one billion barrels of oil equivalent.

The physical principles behind Previous HitboreholeNext Hit gravity logging are quite simple. By measuring minute differences in the earth’s gravity field at different downhole locations, formation densities can be directly computed. In order to do this, the Previous HitboreholeNext Hit gravity sensor must be capable of sensitivities on the order of one part per billion. It is quite difficult to build such sensors, yet 16 Previous HitboreholeNext Hit gravity meters have been built to these specifications since 1970. To put this incredible sensitivity into perspective, it is equivalent to trying to weigh an entire whale in order to determine the weight of one of its whiskers.

The physics behind this particular sensor gives it advantages over other density logging tools. For example:

  • The computation from downhole gravity to density is direct, straightforward and does not require a lithology-dependent calibration.
  • The entire system is passive and does not rely upon radioactive sources.
  • And even more valuable is the depth of penetration of the sensor.

Previous HitBoreholeNext Hit gravity can easily see beyond casing, cement, hole rugosity and near-Previous HitboreholeNext Hit formation damage. It works just as effectively in cased holes as it does in open holes. It is a bulk density method, so when coupled with a near-Previous HitboreholeNext Hit imaging nuclear density method such as a gamma-gamma log, the formation porosity can be computed with great accuracy. Moreover, the pore-filling fluids can often be determined with some reliability. The best results occur with gas vs. liquid, but at higher sensitivities it may be possible to see oil-water contacts.

Tool and Its Resolution

Figure 1 shows the gravity sensor that can detect beyond casing and cement using an inclined spring, lever arm mass. The lever arm mass pivots and stretches the spring under the influence of the local gravity field. This operates similar to a common bathroom scale.

The local gravity field measurements are directly related to nearby formation densities. It is often asked how far can the Previous HitboreholeNext Hit gravity tool “see.” This question is akin to asking how far can the human eye see. Obviously, the sensor has greater reliability at near-well distances, but if the object is large (such as a reef or salt) it may be resolved at greater distances. Typically, it can easily resolve densities within the first 50 feet of the well, but it is not uncommon to image features 100 to 500 feet away. The distance resolution is a tradeoff between downhole resolution. In other words, as the object gets more distant, its signal becomes broader in wavelength. Thus, the method is tunable for more distant objects – but with the price of poorer vertical resolution.

Another question often asked is whether the direction to the object can be determined. Unfortunately, without a multi-well logging program (akin to radio beacon triangulation), this is not currently possible. With single wells it is only possible to determine radial distance away from the Previous HitboreholeNext Hit, but not direction.

Return to top.

Examples of Resolution

Figure 2 shows an example of the distance resolution from Previous HitboreholeNext Hit gravity. In Case 1, there is no distant porous mass; therefore the near-Previous HitboreholeNext Hit detecting gamma-gamma log and the far-detecting Previous HitboreholeNext Hit gravity log show no difference. In Cases 2-4 the distant porous mass is increasingly moved closer to the well bore.

The wavelength of the density difference decreases as the amplitude increases. Thus the amplitude and wavelength of the density difference is diagnostic in determining the distance of the remote mass away from the Previous HitboreholeNext Hit. Notice that this model is sensitive to a distant mass as far away as 200 feet from the Previous HitboreholeNext Hit.

Current and Future Use

Current uses of the Previous HitboreholeNext Hit gravity method include formation evaluation, reservoir monitoring, determining behind-casing bypassed gas and exploration for distant structures.

Figure 3 shows a conceptual new use of the method for detecting the size and shape of a gas cone from a producing well. Previous HitBoreholeNext Hit gravity is not only capable of imaging past a gas cone to determine the true top of the gas-oil contact, but it is also capable of determining the shape of the cone, as these models show.

Figure 4 shows how Previous HitboreholeNext Hit gravity can contribute to a gas discovery. A set of actual logs, acquired in 1996, is shown. The deviation between the near-Previous HitboreholeNext Hit detecting gamma-gamma log and the far-imaging Previous HitboreholeNext Hit gravity log (in yellow) helped determine that the Cannae #1 well was 300 feet away from a porous reef in the east Texas Cotton Valley trend. Based on this information, the well was sidetracked, and a commercial discovery was made.

Why hasn’t Previous HitboreholeNext Hit gravity become a more widespread logging method? This is due primarily to engineering limitations of the present tool. Currently it must be used in nearly vertical, large-diameter boreholes, and it takes on average about five to seven minutes to acquire a data point. The only commercially available Previous HitboreholeNext Hit gravity sensors are manufactured by LaCoste & Romberg of Austin, Texas. LaCoste & Romberg has begun to develop a new Previous HitboreholeNext Hit gravity sensor that is expected to overcome the engineering limitations of the present tool, using advances in digital electronics and materials science.

We predict that these advances will lead to renewed interest in the technology from oil and wireline companies. Innovative new uses, such as time-lapse reservoir surveillance and gas storage monitoring, are also expected to generate new demands for the technology. We foresee a day when Previous HitboreholeTop gravity logs will be as common as any other wireline log. While this technology is old and well-developed, it now has new life.

Return to top.