Print this page
Click to view presentation in PDF format.
Applying Fluid Inclusions to
Petroleum
Exploration and Production*
By
D.L. Hall1, S.M. Sterner1, W. Shentwu1, and M.A. Bigge1
Search and Discovery Article #40042, (2002)
*Adapted from D.L. Hall’s presentation to the Tulsa Geological Society, March, 2002.
1Fluid Inclusion Technologies, Inc. (www.fittulsa.com) ([email protected]), 2217 N. Yellowood Ave., Broken Arrow, OK 74012 USA
Abstract
Mechanical crushing
of core or cuttings samples, followed by bulk analysis of evolved organic and
inorganic fluid inclusion volatiles by quadrupole mass spectrometry using a
rapid, automated sampling system, allows for nearly continuous stratigraphic
mapping of paleofluids in the subsurface. This technique is called Fluid
Inclusion Stratigraphy (FIS). Application to over 6000 wells worldwide has
established the utility of this technique in addressing elements of risk
associated with petroleum exploration and production.
Key indicator
compounds and compound ratios are used to document petroleum migration through
specific stratigraphic intervals, evaluate product type and quality, and
establish a time-integrated effectiveness for potential seals. Additionally, FIS
has proven proficient in identifying zones that are near reservoired petroleum,
even if that petroleum did not migrate directly through the analyzed section.
In these cases, water-soluble hydrocarbons, particularly benzene, toluene and/or
organic acids, occur in anomalous concentration and can often be shown to have
migrated by diffusion through an aqueous phase away from known petroleum
accumulations.
More recently,
production applications have been developed, particularly in the general area of
reservoir and resource characterization. Known applications include delimitation
of pay zones, petroleum-water transition zones and fluid contacts for reserve
estimation and EOR applications, as well as assessment of reservoir
compartmentalization and connectivity. Application of this technology in real
time on drilling wells has been used to influence drilling and testing
decisions.
Integration of FIS
with classical fluid inclusion methodologies provides additional and more
specific data on petroleum fluid properties, salinity of associated aqueous pore
fluids and timing constraints for petroleum migration and reservoir charging.
These data can be used as input into basin models and to assess timing of
petroleum charge as it relates to trap configuration and reservoir quality.
Analysis by solvent-extraction or thermal-extraction GCMS of samples
pre-screened and targeted by FIS as being petroleum-inclusion-rich effectively
establishes links among petroleum-fluid-inclusion-bearing intervals and source
rocks, thereby providing better control on migration pathways. Specific examples
below illustrate how to use the above techniques to:
• Evaluate whether or not petroleum has moved through a dry hole with no shows
that is adjacent to a prospect.
• Determine whether oil or gas should be anticipated in a given area.
• Assess the probability of encountering a deep, hydrocarbon-charged reservoir below a shallow boring.
• Pick perforation points in a problematic pay zone.
• Delineate a pay interval and fluid contact.
• Identify a failed seal.
• Infer a nearby oil field from a wet well with no shows.
• Explicitly evaluate bound-water salinity in the absence of a water analysis.
|
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
uFliud inclusions, their significance uFluid inclusion stratigraphy (FIS)
|
Main Points
Fluid Inclusions and Their Significance
Fluid inclusions are micron-scale, fluid-filled, isolated cavities in or
between crystals in rock material (Figures 1,
2, and 3). They form
during subsurface diagenetic processes in which mineral cement is added
to intergranular pore space or microfractures. Fluid inclusions are
representative of past or near-present-day pore fluids, and they track
movement of aqueous and Fluid inclusions may be the freshest samples of reservoir fluids we have. They remain even after pore fluids change (correspondingly with applications for fossil migration paths, flushed reservoirs and tilted oil-water contacts). Also, they record multiple charges, temperatures and pressures. Classical Approach
Fluid Inclusion Stratigraphy (FIS) (Figures 4, 5, and 6)
E&P Applications of FIS
Inferring Updip Prospectivity from a Wet Well (Figure 7)
Local Prospectivity / Deeper Potential from Shallow Drilling (Figures 8, 9, 10, and 11)
Predicted Drilling Success Rate (Figure 11)
Regional Evaluation (Figure 12)
Identifying Seals (Figure 13)
Seal Effectiveness (Figure 14)
Proximity to Pay and Inferring Nearby Undrilled Pay (Figures 15, 16, 17, 18, and 19)
Pay Delineation and Bypassed Pay Shown in Figure 20 is an excellent top seal to gas reservoir. The gas column is delineated; chemistries track porosity. The present-day gas-water contact is defined; TSR products are identified; and moderately sour gas is indicated. The interpretations were verified with production tests. Figure 21 shows the log suite, along with FIS results, for a well that was an oil discovery, where there was a shallow hole that was not logged. The shallow FIS anomaly is in regionally productive interval with porosity and staining, and the chemistry is analogous to deeper known pay zone. FIS Pay Delineation Statistics
EOR
Follow-Up Analyses: Tools and Information Tools
Information
Summary
Bernard, B. B., 1978, Light hydrocarbons in marine sediments: PhD thesis, Texas A&M University, College Station, Texas, 144 p. Burtell and Jones, 1996, Benzene content of subsurface brines can indicate proximity of oil, gas: Oil & Gas Journal, June 3, 1996, p. 59-63. Faber, E., and W.Stahl, 1984 Geochemical Surface Exploration for Hydrocarbons in North Sea: AAPG Bulletin , v. 68, p. 363 – 386. Larter, S.R., and A.C.
Aplin, 1996, Geochemical Liu, K., and P.J. Eadington, 2000, A new method for identifying oil migration pathways by combining analysis of well logs and direct oil indicators (Abstract): AAPG Bulletin, v. 84, no. 13 (annual meeting abstracts). |
Figure 1. Fluid inclusions in sandstone in
both grains and overgrowth.
Figure 2. 
Figure 3. 
Figure 4. Schematic of FIS technique—sample
crushed in vacuum chamber with analysis by mass spectrometer to yield
mass spectrum.
Figure
5. Automated FIS instrumentation.
Figure 6. FIS data. Depth plots of critical
species and compound ratios integrated with electric logs indicate
Figure 7. Updip prospectivity from wet well.
Fluid Inclusion Stratigraphy (FIS) of downdip dry hole documents
migration of liquids through reservoir section. FIS of subsequent oil
discovery verifies off-structure signal.
Figure 8. Local prospectivity / deeper
potential. Fluid Inclusion Stratigraphy (FIS) of rich gas condensate
discovery indicates gas and liquids prospectivity of area. FIS of dry
hole from same basin shows little encouragement for liquids
prospectivity.
Figure 9. FIS microseep over oil reservoir.
FIS microseep in section where temperature is lower than 60oC
and above sealing interval, which overlies main reservoir sand.
Figure 10. 3-D stochastic modeling of FIS
data; Haltenbanken area, offshore Norway. From FIS, anomalous
concentrations of methane, other light hydrocarbons, and sulfur
compounds in the shallow subsurface probably reflect anaerobic
alteration of vertically seeping gas-range compounds from depth by
sulfate-reducing bacteria.
Figure 11. GOM FIS seep statistics show that
89% of producers show seepage and 76% of the deep dry holes have no
seepage.
Figure 12. Gas vs. liquids prospectivity, at
constant depth, in the Texas Gulf Coast and offshore.
Figure 15. Proximity-to-pay concept,
illustrated by detectable benzene and toluene in formation waters.
Figure 16. Benzene in oil field brines at
Buccaneer field, offshore southeast Texas, as proximity-to-pay indicator
(from Burtell and Jones; 1996) 
Figure 17. Benzene in Alberta Nisku brines
shows good correlation with proximity to production (from Burtell and
Jones; 1996).
Figure 18. FIS infers nearby undrilled pay
from dry well drilled on crest (on top of Kimmeridge Clay), by detection
of anomalous levels of benzene in the lateral seal.
Figure 19. FIS “proximity” geometries. A.
Downdip from a reservoir. B. Across a top seal. C. Across a fault seal.
D. In a waste zone.
Figure 20. Pay and product definition,
Devonian Leduc reef. FIS, along with log and core analyses, delineates
gas reservoir and top seal.
Figure 21. Pay and product definition,
Silurian Guelph reef. FIS, along with log and core analyses, delineates
oil and gas legs.
Figure 22. Identifying bypassed pay by similar
anomalies in C2, A/P 
Figure
23. Reservoir compartmentalization by delineation of barriers, based on
FIS oil inclusion indicator, Sr-RSA (87Sr/86Sr
from residual salt analyses), and fluid inclusion salinities.
Figure 24. EOR 
Figure
25. Petrography and HRCL
Figure 26. Apparatus for fluid inclusion
microthermometry.
Figure 27. Timing of biodegradation. (Left)
Relatively early carbonate vein contains interpreted original and
biodegraded oil. Degradation may have occurred during vein formation.
(Right) Later vein is barren, hence may postdate both 
Figure 28. Example of CSIRO’s GOI 
Figure 29. Homogenization behavior of
Figure 31. Effect of salinity on reserves
estimate 
Figure 32. Fluid inclusion salinity variation
in oil reservoir.
Figure 33. Oil inclusion, API gravity.
Figure 34. Crush GC
(gas chromatography) data on fluid inclusions.
Figure 35. GCMS
(gas chromatography - mass spectrometry) data from fluid inclusions.
Figure 36. GCMS data from biodegraded fluid
inclusions.
Figure 37. Biogenic vs. thermogenic gas in
fluid inclusions.
Figure 38. Prevailing migration model: Liuhua
area, Offshore China (South China Sea), with updip migration along
reservoir to well 11-1-1A.
