Petrophysical Characterisation of
Lower Palaeozoic Reservoirs of Saudi Arabia: An Insight into Factors Controlling
Reservoir
Quality
By
Stephen Carney1, Stephen Hill2, Stephen G Franks1
(1) Saudi Aramco, Dhahran, Saudi Arabia (2) iRES, Ellesmere port, England
There is significant conventional and tight gas potential within the Lower
Palaeozoic clastic reservoirs of Saudi Arabia and a number of prospective,
sand-prone intervals have been identified in Silurian to Cambrian section. This
interval is relatively under explored, but often has encouraging hydrocarbon
shows and well tests. Using a very extensive database, the authors have
identified the principal factors controlling
reservoir
quality
. This has
implications for future exploration in Saudi Arabia.
Sedimentological and petrological data were collected from core, logs, and
outcrop in order to identify significant petrophysical trends and relationships
and better understand the factors controlling
reservoir
quality
. Core porosity,
permeability, and capillary pressure trends have been identified and related to
depositional facies and depth of burial.
The variable burial and temperature histories of the sandstones result in
significant diagenetic control over porosity and permeability. Key factors
detrimentally affecting
reservoir
quality
include at least two phases of quartz
cementation and pervasive illite cementation. In deeply buried sandstones
(>12,000 feet), illite rich reservoirs are typified by dominant (ineffective)
microporosity and low permeabilities (<0.1 md). Much higher permeabilities
(locally >1000 md) are recorded in less deeply buried sandstones where pervasive
illite cementation is not present. Burial history models and fluid inclusion
data have been used to constrain the time of quartz cementation and relate it to
time of hydrocarbon generation and migration.
Enhanced
reservoir
quality
is encountered in areas where early diagenetic
development of chlorite grain coatings has inhibited subsequent quartz
overgrowth cementation, and where intergranular porosity has been supplemented
by feldspar grain dissolution.