[First Hit]

Datapages, Inc.Print this page

Click to view article in PDF format.

 

Reservoir Heterogeneity and Characterization in Deltaic Depositional Systems- Outcrop Analogs for Heavy Previous HitOilNext Hit and Previous HitOilNext Hit Sand Developments*

By

Grant D. Wach1 and Curtis Archie2

 

Search and Discovery Article #40285 (2008)

Posted April 4, 2008

 

*Adapted from extended abstract prepared for AAPG Hedberg Conference, “Heavy Previous HitOilNext Hit and Bitumen in Foreland Basins – From Processes to Products,” September 30 - October 3, 2007 – Banff, Alberta, Canada

 

1 Dalhousie University, Halifax, Nova Scotia, Canada ([email protected])

2 Petrotrin, Point a Pierre, Trinidad and Tobago

 

Introduction

Hydrocarbon occurrences range from the Cretaceous to Pleistocene in the Eastern Venezuelan and Trinidad basins. Distribution and occurrences of heavy Previous HitoilNext Hit and Previous HitoilNext Hit sands form an apparently random stratigraphic pattern within the Tertiary succession in the Trinidad basins. Regional controls on the distribution of heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand include the age and stratigraphy of the deposit, history of uplift and faulting, and lithofacies variability keyed to depositional environments. Heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand reservoirs within the same stratigraphic interval exhibit a variety of API values.

Tectonic regional controls produce thermal events that affect source Previous HitrockNext Hit maturation. Faults control migration, provide trapping mechanisms, and can compartmentalize reservoirs. Depositional controls impact source Previous HitrockNext Hit quality, reservoir distribution, and reservoir quality. Biodegradation and water washing of deposits can occur within separate reservoir compartments in the same stratigraphic reservoir interval.

This article examines the distribution of heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand reservoirs, summarizes the potential controls on the distribution of lower API gravity reservoirs, and provides examples from the Trinidadian basins. We will define heavy Previous HitoilNext Hit as having API gravity below 22.3° and Previous HitoilNext Hit sand with less than 10°API.

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uIntroduction

uFigure captions

uRegional setting

uSource Previous HitrockNext Hit

uStructure & tectonic controls

uStratigraphic distribution

uLithology & environment

uAPI Previous HitoilNext Hit variability

uHydrocarbon alteration

uReservoir depth

uConclusions

uReferences

 

 

Regional Setting

Trinidad lies in the eastern reaches of the eastern Venezuelan Basin (Figure 1) and is subjected to compressive stresses from the NNW that produced transpressional faults and NE-SW trending folds and thrust faults, dividing Trinidad into three discrete basins - a Northern, Southern and Southwestern. Most hydrocarbon occurrences are found in the Southern Basin associated with Late Tertiary structures.

At least three tectonic phases account for the deformation across the Southern Basin (Kennan and Pindell, 2007): 1) southeast-directed thrusting during the Miocene; 2) Pliocene strike-slip along the NE-SW faults and growth faulting; and 3) Pliocene-Recent strike-slip faulting and normal faulting. These phases account for the major tectonic elements in and around the Southern Basin and their associated Previous HitoilNext Hit accumulations in predominantly Miocene and Pliocene reservoirs.

 

Source Previous HitRockNext Hit

Oils found onshore and offshore Trinidad are attributed to the same geochemical family, with differences in geochemical composition due to variations in maturity, source type facies, and alteration (Talukdar et al., 1988, 1990). Previous HitOilNext Hit is sourced primarily from the Gautier and Naparima Hill formations and possibly the Cuche. Fractionation of these marine source rocks produced excellent oils that accumulated in the Tertiary reservoirs.

Geochemical work by Rodrigues and Deokie (1995) indicates that Previous HitoilNext Hit produced from the Naparima Hill Formation is paraffinic, generated from mixed terrestrial and marine kerogens. The oblique collision of the Caribbean and South American plates resulted in the Naparima and Gautier formations entering the hydrocarbon-generating window. Hydrocarbon migration likely occurred in the overthrusting phase that followed, forming the fold belt which extends from the Southern Range to the El Pilar fault in the north.

 

Structure and Tectonic Controls

Structural controls on heavy-Previous HitoilNext Hit-sand distribution are evident by varying Previous HitoilNext Hit-water contacts between and within Previous HitoilNext Hit fields and can be directly observed at outcrop (Wach and Vincent, 2008). API gravity and Previous HitoilNext Hit-water contacts can vary between fault blocks within the same hydrocarbon reservoir. For example, in the intermediate Herrera Sands, faults and associated anticlinal structures provided the traps for Previous HitoilNext Hit accumulation (Hosein, 1990). Thrust faults and (NW-SE trending) normal faults act as flow barriers, forming separate hydrocarbon accumulations with different formation pressures and Previous HitoilNext Hit-water contacts. Similar differences occur between stratigraphic intervals and are influenced by the structural controls.

 

Stratigraphic Distribution

In Trinidad the heavy-Previous HitoilNext Hit and Previous HitoilNext Hit-sand distribution is generally constrained within the Miocene and Pliocene reservoirs of the Southern Basin (Figure 2), with Previous HitoilNext Hit sands apparently restricted to the Pliocene reservoirs. Producing reservoirs occur from 300 feet to 12,000 feet drilled depth and are from shallowest to deepest: Morne L'Enfer, Forest, Cruse, Karamat, and Herrera (Russell, 1988). Porosity decreases with depth from 30-33%, for the shallow Morne L'Enfer reservoirs, to 18 to 30% for Cruse reservoirs.

Permeabilities vary from 10 to 1495 md, depending on reservoir shale content. Shallow formations exhibit high permeabilities of 0.5 to 1.5 darcies, of which unconsolidated reservoirs are typical. Permeability generally decreases with depth, and at the Cruse level it averages 50 md. Hydrocarbon gravities vary from <10° API Previous HitoilNext Hit sand (tar/bitumen) to medium gravity crude oils of l4-28°API. Crude Previous HitoilNext Hit recoveries range from <l% for the shallow heavy Previous HitoilNext Hit to 15 to 25% for the medium gravity crude oils (Russell, 1988).

 

Reservoir Lithology and Depositional Environment

The sandstones forming the uppermost Miocene through Plio-Pleistocene reservoirs are immature litharenites, with evidence of sediment recycling; grains are dominantly fine- to lower medium-grained and subrounded. Overall the sands were deposited within a deltaic setting.

 

API Previous HitOilNext Hit Variability

Table 1 illustrates the variability in the API of oils within fields, in this case the Guapo block of the Pliocene Morne L’Enfer Formation exposed in the Stollmeyer Quarry (Wach and Vincent, 2008). Shallower reservoir intervals have excellent porosity and permeability, but API gravity is poor (low) in the younger Cruse interval.

 

Hydrocarbon Alteration

Several studies have attempted to evaluate the controls of gravity variations among crude oils in Trinidad. These studies conclude that Previous HitoilNext Hit gravity distribution is highly variable and appears independent of depth, age, temperature, and geographic location of reservoirs (Rodrigues and Deokie, 1995).

Common to all studies is that the complex distribution may be a function of multiple alteration processes (Heppard et al., 1990; Talukdar et al., 1988, 1990; Rodrigues and Deokie 1995). These include biodegradation, water washing, gas-condensate mixing, gas stripping, evaporative fractionation, thermal alteration, and alteration imposed by secondary migration. If alteration processes are the major controls on API gravity distribution, accurate API gravity prediction will entail an understanding of geochemical changes, migration pathways and history, source kitchens, and subsurface temperature variations which should be reflected in reservoir crude qualities.

 

Reservoir Depth

Rambarran (1987) showed the significance of gravity segregation of heavy Previous HitoilNext Hit distribution in the Parrylands Forest “A” reservoir. Samaan also shows some gravity segregation and API variation with depth. Shallow reservoir intervals can have heavy Previous HitoilNext Hit in the Penal area, and the deep Herrera can be either heavy or gas/condensate (Higgins, 1955; Requejo et al., 1994).

In Table 1 it can be argued that the shallower reservoir interval, the Cruse, may have been subjected to biodegradation of the oils leading to the lower API gravity. However, previous work by Vincent and Wach (2007) suggested there is not necessarily a direct Previous HitcorrelationNext Hit to depth and higher API values.

 

Conclusions

Table 2 is a summary of the geological controls that are apparent in the distribution of heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand within the reservoirs in the Trinidad basins. Heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand distribution in the Pliocene and Pleistocene reservoirs of the Eastern Venezuelan and Trinidad basins appears to be controlled by several factors that have contributed to biodegradation of the lighter ends, leaving accumulations of lower API heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand deposits. Biodegradation is enhanced by the Plio-Pleistocene reactivation of pre-existing fault structures. This fault control is evident within fields such as Guapo with uplifted blocks comprising Previous HitoilNext Hit sand.

 

References

Beard, J.T., 1985, The general geology of the Guapo Field, Trinidad. Trans. 4th Latin American Geological Conference, Port of Spain, 1979, v. 2, p. 684-689.

Higgins, G.E, 1955, The Barrackpore-Wilson Oilfield of Trinidad: Jour Inst Petroleum, v. 41, p. 125-147.

Heppard, P.H., R.L. Ames, and L.M. Ross, 1990, Migration of oils into Samaan Field, offshore Trinidad, West Indies, in K.A. Gillezeau, ed., Transactions of the Second Geological Conference of the Geological Society of Trinidad and Tobago, p. 157-168.

Hosein, F., 1990. Exploration of the middle Miocene Previous HitoilNext Hit bearing intermediate Herrera Sandstone reservoirs in Trinidad, West Indies, in D.K. Larue and G. Draper, eds.: Transactions of the 12th Caribbean Geological Conference, St. Croix, Aug. 7-11, 1989. Miami Geological Society, Miami, FL, p. 430-443.

Kennan, L., and J. Pindell, 2007, Middle Miocene orogeny in Trinidad: Record of Caribbean collision and template for younger deformation, in Caribbean exploration - Planning for the future: 4th Geological Conference of the GSTT, oral sessions and field trips.

Rambarran, H., 1987, Significance of gravity segregation in heavy-Previous HitoilNext Hit distribution, Forest ‘A’ reservoir, Parrylands Field, Trinidad, West Indies, Section III, Geological Environments and Migration: AAPG SG 25 Exploration for heavy crude Previous HitoilNext Hit and natural bitumen, p. 281-291.

Requejo, A. G., C.C. Wielchowsky, M.J. Klosterman, and R. Sassen, 1994, Geochemical characterization of lithofacies and organic facies in Cretaceous organic-rich rocks from Trinidad, East Venezuela Basin: Organic Geochemistry, v. 22, p. 441-459.

Rodrigues, K., and R.C. Deokie, 1995, Abstracts 3rd GSTT Conference and 14th Caribbean Geological Conference and 14th Caribbean Geological conference, Trinidad, p. 66.

Russell, A., 1988, Reservoir Previous HitrockNext Hit properties of Trinidad formations: GSTT Technical Seminar, Cactus Inn Hotel, San Fernando, 3 p.

Talukdar, S.C., O. Gallango, and A. Ruggiero, 1988, Generation and migration of Previous HitoilNext Hit in the Maturin subbasin, Eastern Venezuela Basin: advances in organic geochemistry, 1987: Organic Geochemistry, v. 13, p. 537-547.

Talukdar, S.C., W.G. Dow, and K.M. Persad, 1990, Deep Previous HitoilNext Hit prospects in Trinidad: Houston Geological Society Bulletin, October, p. 16-19.

Vincent, Hasley, and Grant D. Wach, 2007, Paleogene Slope Deposits; Examples from the Chaudiere, Pointe-a-Pierre and San Fernando Formations, Central Range, Trinidad (abstract): 27th Annual GCSSEPM Foundation Bob F. Perkins Research Conference, p. 39.

Wach, G.D., Lolley, C.S., Mims, D.S., Sellers, C.A., 2004, Well placement, cost reduction, and increased production using reservoir models based on outcrop, core, well-log, seismic data, and modern analogs: Onshore and offshore Western Trinidad, AAPG Memoir 80, p. 279-307.

Wach, Grant D., and Hasley Vincent, 2008, Reservoir heterogeneity and characterization in deltaic depositional systems - outcrop analogs for heavy Previous HitoilNext Hit and Previous HitoilNext Hit sand developments: Search and Discovery Article #50065 (2008).

 

Return to top.