--> Resolution of Static Corrections in Sand Dune Regions: A Successful Case History
[First Hit]

Datapages, Inc.Print this page

Click to view page images in pdf format.


AAPG Bulletin, Vol. 90 (2006), Program Abstracts (Digital)

7th Middle East Geosciences Conference and Exhibition
Manama, Bahrain
March 27-29, 2006

EXTENDED ABSTRACT: Resolution of Previous HitStaticNext Hit Previous HitCorrectionsNext Hit in Sand Dune Regions: A Successful Case History

Koshy Thayyil, Djafar Aitsaadi, Mohammad Al-Homaili and Ralph Bridle
Saudi Aramco

In areas prevalent with sand dunes, conventional assumptions for datum Previous HitstaticNext Hit correction computation can become invalid. The Rub Al-Khali region is well known for sand dunes and sabkha (salt mudflats). Variations in elevation and travel time from dune base to crest are too much for routine Previous HitstaticNext Hit correction methods. This case history shows a successful strategy of solving particular components of the Previous HitstaticNext Hit Previous HitcorrectionsNext Hit independently before combining them. The components include: the sand dune correction, the base of sand to datum correction, the refraction and reflection residual Previous HitstaticNext Hit correction.

A regionally defined time/depth curve describing dune compaction in this area yields sand dune travel times. Final datum statics are calculated by adding this time to the time from base of sand to final datum, using a velocity model derived from upholes.

High and low frequency components within the composite datum statics Previous HitcorrectionsNext Hit are separated. A fter applying only the high frequency statics, the seismic data is corrected to a smooth floating datum. To prevent stacking velocity distortions datum statics are applied from base of sand to final datum with the sand time applied residually.

U nc orrec ted time shifts remain in this initial model, due to differential slip and dip face compaction, and other anomalous surface consistent effects. Surface consistent refraction residual statics are computed and applied on linear moveout corrected data. The Previous HitstaticNext Hit Previous HitcorrectionsNext Hit are completed with surface consistent reflection residual statics.

This method led to a focused time section.

Figure 1. Before Application of Previous HitCorrectionsNext Hit.

Figure 2. After Application of Previous HitCorrectionsTop.

 

Copyright © 2006. The American Association of Petroleum Geologists. All Rights Reserved.