PSElastic
Fracture Analysis in the Tight Gas Sands of the Mesaverde Formation, Piceance
Basin
, Colorado*
By
Jay R. Scheevel1
Search and Discovery Article #10114 (2006)
Posted October 6, 2006
*Adapted from poster presentation at AAPG Annual Convention, Houston, Texas, April 9-12, 2006
Click to view posters in PDF format
(~1.1 mb).
1Scheevel Geo Technologies, LLC, Grand Junction, CO ([email protected])
Abstract
I present theory and supporting mechanical data
demonstrating that elevated pore pressures (and consequent elastic grain
shrinkage) are capable of inducing tensional
framework
stresses in the Mesaverde
rocks of the Piceance
Basin
of northwestern Colorado. Elevated pore pressures in
the
basin
are the result of gas generation in Upper Cretaceous Mesaverde coals.
Tensional
framework
stress conditions inevitably result in the spontaneous
creation and opening of extension fractures in these clastic lithologies.
This treatment makes use of linear elastic theory. I
solve explicitly for the contributions of both
framework
- and grain-volume
deformations resulting from specific overburden-, tectonic-, pore-pressure-, and
temperature-induced strains. Fracturing is enabled by the presence of a zero
lateral strain boundary condition. This boundary condition is imposed because of
the semi-infinite lateral extent of layered rocks in the subsurface basinal
setting.
Data from the Multi-Well Experiment (MWX) illustrates
my conclusions. The MWX was a multi-year, multi-million dollar Department of
Energy (DOE)-sponsored experimental study of the Mesaverde tight gas sands and
has proven to be a wealth of both data and insight on the Mesaverde lithologies
of the Piceance
Basin
.
Rock mechanics charts illustrate the results of the elastic analysis, showing the onset and opening tendency of fractures in rocks over a spectrum of rock-mechanical properties and pore-pressure gradients. To reveal how the Mesaverde lithologies may respond to subsurface conditions, rocks from the MWX test wells are depicted on these charts, predicting that open fractures will result from pore-pressure gradients in the 0.5 to 0.8 psi/ft range.
Selected Figures
|
Location map for Piceance |
|
|
Structural cross-section, Piceance |
|
References
Law, B.E., and Johnson, R.C., 1989, Structural and stratigraphic fa=ramework of the Pinedale anticline, Wyoming, and the Multiwell Experiment site, Colorado: U.S. Geological Survey Bulletin 1886, p. B1-B11.
Lorenz, J.C., A.R. Sattler, and C.L. Stein, 1989, The effects of depositional environment on petrophysical properties of Mesaverde reservoirs, northwestern Colorado, in Formation evaluation and reservoir geology, SPE Publ. No. 64, p. 119-132.
Spencer, C.W., 1989, Comparison of overpressuring at the Pinedale anticline area, Wyoming, and the Multiwell Experiment site, Colorado: US. Geological Survey Bulletin 1886, p. C1-C16.
Warpinski, N.R., and L.W. Teufel, 1989, Viscoelastic constitutive model for determining in-situ magnitudes from anelastic strain recovery of core: SPE Production Engineering, v. 4, no. 3, p. 272-280.
Yurewicz, D.A., 2005, Controls on gas and water distribution,
Mesaverde
basin
center gas play, Piceance
Basin
, Colorado (extended abstract):
Search and Discovery Article #90042 (2005) (http://www.searchanddiscovery.net/documents/abstracts/2005hedberg_vail/abstracts/extended/yurewicz/yurewicz.htm.
Yurewicz, D.A., K.M. Bohacs, J.D. Yeakel, and K. Kronmueller,
2003, Source rock analysis and hydrocarbon generation, Mesaverde Group and
Mancos Shale, northern Piceance
Basin
, Colorado, in Peterson, K. M.,
Olson, T. M., and Anderson, D. S., eds., Piceance
Basin
2003 Guidebook: Rocky
Mountain Association of Geologists, p. 130-153.