--> Evaluation Techniques of Wellbore Stability on Complex Formation based on Wettability
[First Hit]

International Conference & Exhibition

Datapages, Inc.Print this page

Evaluation Techniques of Wellbore Stability on Complex Formation based on Previous HitWettabilityNext Hit

Abstract

Previous HitWettabilityNext Hit is not only controlling factors of reservoir fluid distribution, but also greatly affects physical and chemical properties of rock, including capillary force, relative permeability, electrical properties and even strength. Especially before and after drilling formation, Previous HitwettabilityNext Hit has a more important influence on wellbore stability. In most previous literatures, unchanged Previous HitwettabilityNext Hit considered as a default premise, impact of Previous HitwettabilityNext Hit and its changes on the rock, thereby on wellbore stability was ignored. In this paper, an oilfield in western China taken for example, from the viewpoint of Previous HitwettabilityNext Hit, wellbore instability mechanism under the condition of oil-based drilling fluid was studied. During the process, the core samples were investigated using X-ray diffraction (XRD) tests, water activity (Aw) tests, swelling ratio (sw) tests, dynamic wetting test, computerized tomography (CT) tests, Field Emission Scanning Electron Microscope (FE-SEM) tests and uniaxial compressive strength (UCS) tests. The results indicate that Previous HitwettabilityNext Hit has a great influence on micrometer or even nanometer cracks, the stress accumulated by which is one of micro-cracks extension and growth, whereas traditional theory had ignored usually. According to the structure and composition of the cores and Previous HitwettabilityNext Hit changes resulted from the cores contacted with drilling fluid filtrates with different performance parameters, such as water activity et al, a comprehensive characterization model on the properties of rock and drilling fluid based on Previous HitwettabilityNext Hit was proposed to maintain the original strength of rock. The model above considered Previous HitwettabilityNext Hit was used as an effective solution to the problem that wellbore instability occurred frequently even though density and conventional performances of oil based drilling fluid are within a reasonable range of projects. The model will also provide a theoretical basis and technical support based on the Previous HitwettabilityTop for designing performance properties of oil based drilling fluid.