--> Abstract: Woodford Completion Efficiency Improvement through Applied Geology, by Charlie Smith; #90184 (2013)
[First Hit]

Datapages, Inc.Print this page

Woodford Previous HitCompletionNext Hit Efficiency Improvement through Applied Geology

Charlie Smith
Halliburton

Production results from the Woodford formation are difficult to pre-dict and evaluate. Horizontal wells in this play can produce extremely Previous HitwellNext Hit, but are sometimes surrounded by poor producers. One of the most frustrating aspects of these wells from the perspective of the Previous HitcompletionNext Hit is the inconsistency of fracture treatments to be effec-tively placed. In specific wells, some treatments pumped as de-signed, but many others could not even initiate breakdown. Some understanding of the geology of the reservoir could contribute to un-derstanding these failures. There is still significant discussion about the best source of geologic knowledge for Previous HitcompletionNext Hit in these uncon-ventional reservoirs, but the development of an efficient Previous HitcompletionNext Hit design is still the desired objective. Different logging technologies to assist in this design have been attempted with varying degrees of success.

A decision was made to establish a control case with an evaluation of conventional practices. The Previous HitwellNext Hit was drilled and completed following the accepted methods and treatment designs for other Woodford wells in the area. A comparison Previous HitwellNext Hit would acquire geologic informa-tion through elemental capture, dipole sonic, and nuclear magnetic resonance with the objective of determining rock composition, verti-cal- and horizontal-rock mechanical properties, effective porosity, and permeability. These factors would be used to target Previous HitcompletionNext Hit areas in the horizontal Previous HitwellNext Hit and design fracture treatments that would cre-ate effective flow geometry from the reservoir to the wellbore.

This paper details some of the Previous HitcompletionNext Hit data in the control Previous HitwellNext Hit and in a subsequent, geologically-focused Previous HitwellNext Hit. The results were ex-tremely positive. Fracture treatment placement in the control Previous HitwellNext Hit was inconsistent. Better knowledge into the geology of the reservoir resulted in improved placement within the Previous HitwellTop. Statistical improve-ment from 25% to 100% fracture treatment placement efficiency was achieved. Log results and pumping treating records are presented and compared for these situations.

AAPG Search and Discovery Article #90184 © AAPG Woodford Shale Forum, Oklahoma City, Oklahoma, April 11, 2013