--> ABSTRACT: Tight Gas Reservoirs: Opportunities and Challenges, by Khlaifat, Abdelaziz; Qutob, Hani; Barakat, Naiem; #90141 (2012)
[First Hit]

Datapages, Inc.Print this page

Previous HitTightNext Hit Previous HitGasNext Hit Reservoirs: Opportunities and Challenges

Khlaifat, Abdelaziz *1; Qutob, Hani 1; Barakat, Naiem 1
(1) Weatherford Oil Tool, Dubai, United Arab Emirates.

With the increased global demands on oil and Previous HitgasNext Hit, operators strive to maximize production by conducting more advanced drilling operations, such as extended reach, horizontal and high-pressure/high-temperature (HP-HT) drilling and are expanding globally into drilling unconventional resources. Unconventional Previous HitgasNext Hit resources offer significant Previous HitgasNext Hit production growth potential in the coming years, currently accounting for 43% of the US Previous HitgasNext Hit production. Previous HitTightNext Hit Previous HitGasNext Hit Sands (TGS) represents approximately 70% of the unconventional production and significant reserves are yet to be developed.

However, economical production of TGS is very challenging as it exists in reservoirs with micro-Darcy range permeability and low porosity but has a huge potential for production in the future. Poor permeability results in lower Previous HitgasNext Hit production rates from TGS reservoirs. In order to economically develop TGS resources an advanced technology has to be developed and implemented. Most of the TGS reservoirs are characterized by being thick (hundreds to thousands of feet thick) and multilayered where their Previous HitgasNext Hit production rates can be enhanced by hydraulic fracturing. Although service companies have large capabilities for conventional/unconventional reservoirs but the used technology to drill, complete and stimulate Previous HittightNext Hit Previous HitgasNext Hit reservoir is quite complex and the results are often unexpected and unforeseen. The appropriate completion methods and stimulation techniques in these reservoirs are dependent on many parameters and variables, such as depth, pressure, temperature, capillary and overburden pressures and the number of sand layers.

This paper takes a multidisciplinary approach to better understand how Previous HitgasNext Hit can be produced from Previous HittightNext Hit Previous HitgasNext Hit sand reservoirs and provides a technical overview of the state-of-the-art technology used to develop those reservoirs and address their challenges. Two real case histories will be presented; Travis Peak formation in eastern Texas, USA; and Risha Previous HitgasTop field in eastern Jordan.

 

AAPG Search and Discovery Article #90141©2012, GEO-2012, 10th Middle East Geosciences Conference and Exhibition, 4-7 March 2012, Manama, Bahrain