[First Hit]

Datapages, Inc.Print this page

Click to view complete article.

Integrated Study of Petrophysical Properties of Highly Heterogeneous Miocene Reefal Carbonate Rocks

Charlotte Garing
Géosciences Montpellier, CNRS / UMR 5243, Montpellier, France

Post-depositional hydro-chemical alteration processes, including dissolution and precipitation, are controlling the development of multi-scale heterogeneities in carbonate rocks, leading to extremely variable and complex pore morphologies. As a result, the hydrodynamic properties may range over several orders of magnitude. For instance, more or less localized dissolution, cementation and dolomitization events can modify irreversibly the original structure, with the formation of highly conductive zones or, at the opposite, permeability barriers. Because of the growing heterogeneity and feedback effects of the flow, transport and reaction, virtually all types of porosity can be found within the same reservoir, depending on the hydrochemical forcing. The characterization of the pore arrangements and their relations with the macroscopic properties is essential to parameterize reservoir exploitation or groundwater contamination models (Choquette and Pray, 1970; Chilingarian et al., 1992; Lucia, 1995; Moore, 2001; Mylroie and Carew, 2003).

In reservoir engineering, hydrodynamic properties can be estimated from Previous HitelectricalNext Hit resistivity data using heuristic models (e.g. Archie and Kozeny-Carman’s laws) relating Previous HitelectricalNext Hit conductivity to porosity and permeability. The Previous HitelectricalNext Hit resistivity is actually one of the most commonly used properties to describe porous media morphology. Indeed the electric current being predominantly conducted by the fluid phase through the connected fraction of the pore space, Previous HitelectricalNext Hit resistivity measurements lead to precious information about the pore network structure. Previous HitElectricalNext Hit resistivity has been widely used to study the lithology, the porosity and the water saturation of reservoirs since the pioneering works of Schlumberger (1972, 1974). However, although the relationship between resistivity and porosity, often achieved by using the empirical Archie’s law (Archie, 1942), has been proven to be predictive for many sandstone reservoir, it often faces strong limitations when applied to carbonate rocks which usually display complex pore structures (Verwer et al., 2011). The Archie’s exponent , also called the cementation factor, quantifies the variation of the Previous HitelectricalNext Hit resistivity for a given porosity. It is often set to 2 in carbonate rocks. However it can be extremely variable, depending on the shape and type of grains and pores, the specific surface area or the tortuosity for example (Salem and Chilingarian, 1999). In addition to the cementation factor, the Previous HitelectricalNext Hit tortuosity is also used to link resistivity to porosity by the mean of empirical laws (Archie, 1942; Wyllie and Rose, 1950; Winsauer et al., 1952; Cornell and Katz, 1953; Clenell, 1997). Then the permeability is usually predict from the combination of the porosity, the critical pore size, the specific surface, the Previous HitelectricalNext Hit resistivity and/or the Previous HitelectricalNext Hit tortuosity (Kozeny (1927), Carman (1937, 1956), Bear (1972) and Dullien (1979). The many existing empirical relationships are usually derived from simple models of the pore space and often face limitation when applied to a real media, leading to truly false permeability estimates.

The present study is investigating the link between porosity, Previous HitelectricalNext Hit resistivity and permeability by examining their relations with parameters that characterize the three-dimensional (3D) geometry of the pore network. The overall aim is twofold: first propose a pertinent methodology for investigating highly heterogeneous reservoir from pore scale to the scale at which effective macroscopic properties and parameters are usually measured, and second bring new data on carbonate rocks that have experienced many hydrochemical alteration events, emphasizing on the control of pore structure on the petrophysical and transport properties in both case.

This study focuses on the petrophysical properties of a Miocene reefal platform from Mallorca, Spain, first described by Esteban (1979) and Pomar et al. (1996). The experimental site of Ses Sitjoles, located 6 km away from the coast, comprises cored boreholes of 100 m depth which sample the three units of the Miocene reef complex: intern platform-like structures at the top, karstified reefal constructions in the middle and forereef deposits at the base. The actually observed rocks have been submitted to various hydrological environments and chemical processes linked to saline intrusions. Repeated cycles characterized by secondary dissolution porosity, cementation features and mineral replacement or stabilization are extensively observed, producing an increase of the pore size variability. A particular attention was drawn to three zones showing drastic change in porosity happening over a few cm only, mostly located at the limit between two different geological units (25 m depth, 37 m depth and 61 m depth). A set of petrophysical measurements and calculations (porosity, density, Previous HitelectricalNext Hit resistivity, formation factor, cementation factor and tortuosity) were conducted on 46 mini cores of 9 mm-diameter and 18 mm-length sampled in the three zones. One of the zones (25 m depth) was fully described with permeability measurements, mercury intrusion porosimetry and the characterization of the 3D pore structure X-Ray microtomography (XRMT) images, obtained at the European Synchrotron Radiation Facility (ESRF) in Grenoble with a pixel size of 5,06 mm. The data processing included the determination of the connected porosity, percolation clusters, mobile/immobile domain and the computation of the Previous HitelectricalNext Hit tortuosity and microstructural descriptors such as the pore-size and chord length distribution functions and the specific surface.

The Archie’s relationship between porosity and Previous HitelectricalNext Hit resistivity describes quite efficiently the data sets with a cementation factor m ranging from 2 to 2.6 depending on the zone and tortuosity values ranging from 4.8 to 9.8. However, the tightest samples significantly deviate from the linear relationship followed by most samples with porosity above 10% and each zone present samples with similar porosity but different values of formation factor, which confirms that the porosity alone is not sufficient to explain Previous HitelectricalNext Hit behavior in carbonates and that the porous media should be further investigated to avoid false porosity and thus permeability estimates.

The detailed analysis of the pore structure of the zone at 25 m depth suggests that samples with large simple pores (high pore-size and low specific surface), such as vugs or molds, have high values of resistivity, cementation factor and Previous HitelectricalNext Hit tortuosity, and that inversely, samples characterized by a complex network with small pores (small pore-size and high specific surface) have low values of resistivity, cementation factor and Previous HitelectricalNext Hit tortuosity. The results also show that, contrary to what is usually assumed, the most porous and less resistive and tortuous sample (sample N) is not the most permeable, and that a much less porous and more resistive and tortuous sample (sample A) can be more permeable (cf. figure). The major difference between the two samples is the size of the pore-diameter connecting the pore network. In this particular data set, hydrodynamic flow appears to strongly depend on the critical pore size of the percolating network, rather than on Previous HitelectricalNext Hit formation factor or tortuosity, which are also often used as a measure of flow efficiency in many Kozeny-Carman type of equations.

The overall study highlights the remarkable µm-scale heterogeneity of the studied carbonate data set and the strong control that this heterogeneity has on the macroscopic measured petrophysical and hydrodynamical properties. In reservoir engineering, porosity, water saturation and permeability are usually estimated from downhole Previous HitelectricalNext Hit data using heuristic resistivity-porosity and porosity-permeability relationships that have been proven to be successful in sandstones. However, it is shown here that we cannot rely on these relationships in carbonate rocks, precisely because of the combination of two realities: first, heterogeneities occur at scales smaller that than of the integration volume of the borehole geophysical Previous HitmethodsTop (tens to hundreds of cubic centimeters in the best cases) and second, these mm to cm-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock. For application to such highly heterogeneous carbonates, we believe that borehole geophysical measurements must be associated with both multi-scale 3D imagery techniques and core-scale geophysical properties measurements in order to describe the scale dependencies of the parameter relationships and obtain pertinent macroscale upscaled rules in fine.


AAPG Search and Discovery Article #120034©2012 AAPG Hedberg Conference Fundamental Controls on Flow in Carbonates, Saint-Cyr Sur Mer, Provence, France, July 8-13, 2012