--> Abstract: Core Analysis Issues in Tight Gas Reservoirs, by Miller, Michael, Robert Lieber, Eugene Piekenbrock, and Thalbert McGinness; #90071 (2007)
[First Hit]

Datapages, Inc.Print this page

Core Analysis Issues in Tight Gas Reservoirs

Miller, Michael, Robert Lieber, Eugene Piekenbrock, and Thalbert McGinness
BP Americas Inc, Houston, TX

     Increased focus in tight gas reservoirs has stirred a debate concerning potential uncertainties in Previous HitdeterminingNext Hit gas in place and recoverable gas. There are questions concerning the reliability (accuracy and reproducibility) and applicability of routine and special core analysis measurements to the in-situ rock. Small pore volume and the low flow capacity make these rocks particularly sensitive to measurement errors and make it difficult to reproduce in-situ conditions. A survey of some recent literature provides a glimpse at the state of the art in low permeability core analysis procedures. Recently, it has been shown that the most commonly used unsteadystate technique over estimates permeability. The differences are most significant for permeability less than 0.01 md. Legacy data for rocks with permeability of less than 0.01 md will be biased high, potentially by up to an order of magnitude. Multiphase permeability measurements show a wide variability of permeability reduction with changes in wetting phase Previous HitsaturationNext Hit. Modeled gas recovery varies by more than 30 percent based on these data. Differences in irreducible Previous HitwaterNext Hit Previous HitsaturationNext Hit from capillary pressure curves exist depending on test method. Uncorrected high-pressure mercury injection data often inaccurately characterizes capillary pressures at irreducible Previous HitwaterNext Hit Previous HitsaturationNext Hit. Formation Previous HitwaterNext Hit salinity can show significant variability (+/- an order of magnitude) when reconstructed from a Dean Stark analysis. Previous HitWaterNext Hit resistivity and Previous HitsaturationNext Hit in core is difficult to measure in rocks with low total pore volume. Archie Previous HitsaturationNext Hit exponent can vary depending on analysis technique. Single point versus multipoint resistivity index measurements and test duration can have a large effect on Previous HitsaturationTop exponent. These tests can take weeks/months instead of days to become stable. The prudent evaluation of low permeability rocks worldwide requires the ability to understand and limit these and other sources of petrophysical uncertainty.

 

AAPG Search and Discovery Article #90071 © 2007 AAPG Rocky Mountain Meeting, Snowbird, Utah