--> Abstract: Petrophysical Rock Types - a Building Block For the Tengiz Field, by Mark Skalinski, Steve Jenkins, Bruce Caplan, Travis Billiter, and Jeroen Kente; #90072 (2007)
[First Hit]

Datapages, Inc.Print this page

Petrophysical Rock Previous HitTypesNext Hit - a Building Block For the Tengiz Field

Mark Skalinski1, Steve Jenkins2, Bruce Caplan3, Travis Billiter1, and Jeroen Kente4
1TengizChevroil, Atyrau, Kazakhstan
2CABGOC, Luanda, Angola
3Chevron ETC, San Ramon, CA
4Chevron Energy Technology Company, Voorburg, Netherlands

Carbonate facies definitions are a critical control on the distribution of reservoir properties. Recent work to define reservoir rock Previous HittypesNext Hit at Tengiz Field in Kazakhstan, have lead to improved characterization of key properties (porosity, permeability and water saturation). The new rock Previous HittypesNext Hit defined from petrophysical data are the basis for the in-place oil volume and more reliable oil recovery estimates.
Tengiz is an isolated carbonate buildup. The distribution of rock Previous HittypesNext Hit in the platform is determined by diagenetic modification of an earlier reservoir system that included meteoric alteration and porosity enhancement . Upper slope microbial boundstone represents the dominant source for the middle and lower slope breccias. Periodic failure of the rim resulted in a high degree of lateral facies discontinuity and during late diagenesis formed a high-permeability, Previous HitwellNext Hit-connected reservoir. This diagenetic overprint is often associated with the presence of bitumen.
New petrophysical rock Previous HittypesNext Hit (PRT) represents a step improvement over depositional facies used in previous model generations. Petrophysical rock Previous HittypesNext Hit were defined for Volcanic, Bitumen Rich, Tight/Cemented, and reservoir facies of varying quality. Key logs for the definition of these facies include Spectral Gamma, Multimin-derived bitumen volume and porosity, and T2 distribution from CMR log.
Petrophysical Rock Previous HitTypesTop were distributed using the Multi Point Statistics (MPS) and SGS. They have lead to improved distribution of porosity and oil volume in reservoir model and resulted in significant redistribution of oil between platform and flank. The history matching process shows that they allow better control of the permeability distribution.

 

AAPG Search and Discovery Article #90072 © 2007 AAPG and AAPG European Region Conference, Athens, Greece