--> ABSTRACT: Micro to Macro Scale Fault Seal Investigations: Application to the Penola Trough, Offshore South Australia, by Richard Jones, Dave Dewhurst, and Richard Hillis; #90913(2000).
[First Hit]

Datapages, Inc.Print this page

ABSTRACT: Micro to Macro Scale Previous HitFaultNext Hit Seal Investigations: Application to the Penola Trough, Offshore South Australia

Jones, Richard1, Dave Dewhurst2, and Richard Hillis3
(1) National Centre for Petroleum Geology and Geophysics, University of Adelaide, Adelaide, Australia 
(2) CSIRO Division of Petroleum Resources, Glen Waverley, Australia 
(3) University of Adelaide, Adelaide, SA, Australia

Successful Previous HitfaultNext Hit seal analysis depends on integrating a number of predictive strategies and data amalgamated from seismic scale down to microscale. In the subsurface, open fractures constitute a seal risk, in that fractures oriented close to criticality within the in situ stress field are most likely to transmit fluids. Determination of the in situ stress field with knowledge of the failure envelope allows a more accurate assessment of fracture orientations at risk. Triaxial stress data can be combined with macroscale borehole breakout data to evaluate strikes of shear and tensile failure Previous HitplanesNext Hit and critical failure angles for shear, assuming a normal Previous HitfaultNext Hit stress condition. Structural analysis of cores reveals the extent and continuity of fracture connectivity throughout a cored interval. Structural densities are indicative of damage zone geometries and can be used to predict fluid transmissibility in Previous HitfaultNext Hit zones. Microstructural analysis of Previous HitfaultNext Hit gouge shows grain fracturing resulting in grain size reduction and decreased sorting relative to the undeformed reservoir, which is likely to inhibit fluid flow. Cataclastic faults may exhibit evidence of post-deformation quartz cementation which can result in increased threshold pressures relative to the undeformed sandstone. An example of the application of these integrated techniques from the Penola Trough is discussed. The example indicates that such an integrated study can provide a powerful analysis of seal risk in terms of both Previous HitfaultNext Hit seal capacity, fracture orientation and Previous HitfaultTop zone fluid flow properties. This work is part of the Australian Petroleum Cooperative Research Centre's Program on "Hydrocarbon Sealing Potential of Faults and Caprocks".

AAPG Search and Discovery Article #90913©2000 AAPG International Conference and Exhibition, Bali, Indonesia