[First Hit]

Petroleum Drilling Techniques, Issue 1, 2019

Datapages, Inc.Print this page

Optimization of the Structural Design of the Previous HitIntegralNext Hit Slip of a Soluble Bridge Plug

Abstract

In order to improve the anchoring performance of the Previous HitintegralNext Hit slip of a soluble bridge plug, the team took the design of the Previous HitintegralNext Hit slip suitable for a ϕ95.0 mm soluble bridge plug as an example, and then proposed a structural optimization design.According to the results from fracture experiments and numerical simulation of the Previous HitintegralNext Hit slip, when the groove length 1/2 and above reach tensile strength under the effect of axial force, the slip fracture opens.Based on this law, the structure of stress groove was optimized by a numerical simulation.The Previous HitintegralNext Hit slip adopted the form of six stress grooves, the length, thickness and width of stress groove were 25.0 mm, 2.0 mm and 4.0 mm, respectively.The distance from the front end and back end was 25.0 mm and 10.0 mm, respectively.Under this structure, the breaking force of the slip was 72 kN, which met the technical requirements of the slip breaking force when the ϕ95.0 mm soluble bridge plug was sealed.Moreover, numerical simulations and fracture experiments both showed that the Previous HitintegralNext Hit slip after structural optimization could avoid C-shaped openings, resulting in better pressure bearing capacity and better anchoring performance of the slip.The results also demonstrated that, after structural optimization design, the breaking force of the Previous HitintegralNext Hit slip of soluble bridge plug experienced an obvious decrease.The Previous HitintegralTop slip is capable of avoiding a C-shaped opening, which can improve the anchoring performance.