--> A Dynamic Reserve Estimation Method for Both Methane and Water in Coal Reservoirs

AAPG ACE 2018

Datapages, Inc.Print this page

A Dynamic Reserve Estimation Method for Both Methane and Water in Coal Reservoirs

Abstract

Coalbeds in situ contain significant amounts of water, and ideally this water is removed by pumping prior to the primary recovery of coalbed methane (CBM) to lower pressure and stimulate methane desorption. Such a prior water production can be challenging because desorption depends on the occurrence state of methane and water in situ. The objectives are to: (1) quantify both the occurrence state of methane and water of different coals for a range of coalbed properties and conditions, (2) specifically quantify the impact of coal moisture on methane desorption.

In this study, ultimate and proximate analysis and methane adsorption tests were first conducted on several coal samples from different basins. Simplified local density (SLD) theory was then tailored and applied to describe the adsorption characteristics of specific methane/water mixtures for each coal. Then, a fluid mixing rule was introduced to characterize the competitive adsorption processes and a minimum potential energy method was applied to distinguish primary and secondary water adsorptions. Analysis of all resulting data included a regression analysis to obtain best fit parameters. Finally, an analytical reserve estimation method for methane and water was developed to quantify the original reserves and their change, and results of the method were compared to forecasts by conventional simulators.

Combined results of all analyses suggest that both methane and water adsorptions decrease with temperature. While water adsorption decreases monotonically with pressure, methane adsorption first increases then decrease with pressure. Maximum methane adsorption occurs at approximately 10 MPa pressure. Fixed carbon is the effective components adsorbing methane while equilibrium moisture isn’t, on the contrary, water will compete with methane for adsorption sites, thus degrading the effective methane adsorption capacity of coal. Both methane and water adsorptions on coals can be effectively described by a competitive adsorption model, but the impact of moisture on methane desorption varies with temperatures and pressures. With water divided into adsorbed and free states and with methane occurring in adsorbed, free, and dissolved forms, the proposed reserve estimation method predicted approximately the same original reserves as existing simulators predict, and also quantifies how reserves change during CBM recovery.

</