--> Abstract: Identifying Flow Intervals by Pore Geometry and Petrophysics: Middle Trinity Aquifer (Lower Cretaceous Limestone), by B. J. Everett; #91004 (1991)

Datapages, Inc.Print this page

Identifying Flow Intervals by Pore Geometry and Petrophysics: Middle Trinity Aquifer (Lower Cretaceous Limestone)

EVERETT, BARBARA J., University of Texas at San Antonio, San Antonio, TX

A core from the Lower Cretaceous middle Trinity aquifer of southern Kendall County, Texas, was analyzed to compare its petrographic and petrophysical properties to its hydraulic flow characteristics. The analyses helped determine flow intervals in the core. Flow intervals are defined as vertical zones having similar geologic (depositional and diagenetic) history, petrophysical properties, and hydraulic conductivity characteristics. The information gathered from the study of a single core may be integrated with similar data from other cores or well logs to define "flow units." Methodology involved visual and image analysis examination of thin sections and epoxy pore casts of samples to evaluate pore geometry (pore size, pore throat size, pore interconnectivity, and pore throat size het rogeneity). Samples were thus grouped into pore-type families. Representative samples from each pore-type family were tested for air and brine permeability, porosity, and mercury injection capillary pressure. Pore throat size distributions obtained from the capillary pressure analyses were compared to the data derived from the pore casts and thin sections.

Pore geometry evaluation correlated well with mercury capillary pressure data for the most permeable zone of the core. Geologically, this flow interval consists of a porous, medium-grained peloid grainstone that is characterized by large pores connected by large pore throats. Wherever present, such pore throat to pore body size ratios enhance flow through the rock. Correlation between pore geometry and capillary pressure data deteriorate in packstones with increasing micrite mud content and wackestones with increasing dolomitization. These lower correlations are due to decreasing pore throat size and increasing pore throat size heterogeneity in these rocks.

 

AAPG Search and Discovery Article #91004 © 1991 AAPG Annual Convention Dallas, Texas, April 7-10, 1991 (2009)