--> Crosswell Seismic in Carbonate Reservoirs – Examples of High-Resolution Reservoir Delineation, by Paul M. (Mitch) Harris #40307 (2008)
[First Hit]

Datapages, Inc.Print this page

Click to view presentation in PDF format.

 

Crosswell Seismic in Carbonate Reservoirs – Previous HitExamplesNext Hit of High-Resolution Reservoir Delineation*

By

Paul M. (Mitch) Harris1

 

Search and Discovery Article #40307 (2008)

Posted September 3, 2008

 

*Adapted from oral presentation at AAPG International Conference & Exhibition, Barcelona, Spain, September 21-24, 2003. See companion article, "Carbonate Reservoir Delineation from Seismic Previous HitDataNext HitPrevious HitExamplesNext Hit of Crosswell Seismic," Search and Discovery Article #40299 (2008).
Click to view list of articles adapted from presentations by P.M. (Mitch) Harris or by his co-workers and him at AAPG meetings from 2000 to 2008.

 

1 ChevronTexaco E & P Technology Company, San Ramon, CA ([email protected])

 

Abstract

Crosswell seismic tomography provides better reservoir resolution than surface 2D or even 3D Previous HitdataNext Hit; therefore, there should be value added in reservoir delineation. Previous HitExamplesNext Hit of crosswell seismic Previous HitdataNext Hit from two U.S. Permian Basin fields illustrate the resolution and some potential applications of this type of Previous HitdataNext Hit: (1) defining greater geologic detail between wells (heterogeneity of reservoir), (2) recognizing laterally continuous zones for improved development (well positioning, completions, injection), and (3) input for reservoir models (layering and assigning porosity).

In the first example, the producing formation is limestone with minor dolomite and shale. 3D seismic and downhole log Previous HitdataNext Hit suggest lateral discontinuities, but details are ambiguous due to the poor resolution. Crosswell Previous HitdataNext Hit defines the nature of some of the reservoir discontinuity, in that clinoforms which are imaged can potentially isolate reservoir compartments. A comparison with outcrop facies geometries provides some sense of the reservoir facies to be expected between wells.

The second example is a diagenetically complex cyclic shelf dolomite. Variations in amplitude on the crosswell Previous HitdataNext Hit are the most striking lateral features, and nearly every positive-amplitude event coincides with a significant increase in velocity on sonic logs. Both the seismic and log Previous HitdataNext Hit respond to the same diagenetic overprint and its resulting petrophysical characteristics; therefore, log-derived facies relate to the crosswell Previous HitdataNext Hit better than core lithofacies. Comparing crosswell Previous HitdataNext Hit with geostatistical porosity models to further analyze the potential imaging of lateral porosity variation suggests lateral changes in porosity of less than 56 m but more than 15 m are being imaged.

 

 

 

References

Eisenberg, R.A., and P.M. Harris, 1994, Application of chemostratigraphy to differentiating bounding stratigraphic surfaces: AAPG 1994 Annual Meeting Abstracts, p. 143.

Martin, R.L., C.L. Welch, G.D. Hinterlong, J. Meyer and R. Evans, 2002, Using crosswell seismic tomography to provide better reservoir resolution in the Wolfcamp Formation in Lea County, New Mexico: in The Permian Basin; Preserving Our Past – Securing Our Future, West Texas Geological Society #02-111, p. 25-34.

Tucker, K.E., P.M. Harris, and R.C. Nolen-Hoeksema, 1998, Geologic investigation of cross-well seismic response in a carbonate reservoir, McElroy Previous HitfieldTop, West Texas: AAPG Bulletin, v. 82/8, p. 1483-1503.

 

Return to top.