--> Five Reasons for Carbonate Oil Production at High Archie Calculated SW
[First Hit]

AAPG Middle East Region Geoscience Technology Workshop

Datapages, Inc.Print this page

Five Reasons for Carbonate Oil Production at High Archie Calculated SW

Abstract

Previous HitWaterNext Hit free oil production from carbonates at high Archie calculated SW may occur when: (1) The calculated SW is not correct. (2) The calculated SW is correct but the Previous HitwaterNext Hit is immobile. (3) A combination of the previous two. High SW is generally considered above 50%. Five reason for Previous HitwaterNext Hit free oil production at high Archie SW are: (1) Layer formation – Stacked layers of small pore size rock (micritic Wackestone) with coarse pore system rock (Grainstone) below the resolution of the resistivity tool. (2) Dual porosity system – Large pores surrounded by micritized grains. The large pores flow oil while the capillary Previous HitboundNext Hit Previous HitwaterNext Hit in the micrite grains is immobile. (3) Fractures – Fine grained matrix with capillary Previous HitboundNext Hit Previous HitwaterNext Hit combined with fractures flowing oil and a lowering of Archie’s cementation exponent. (4) RT lowered due to deep conductive mud filtrate invasion. (5) Conductive minerals such as pyrite. Whether a porous rock at a given saturation produces Previous HitwaterTop free oil depends on the assemblage of pore and pore throat sizes and the rock wettability.