--> Uncertainty Analysis in Capillary Controls Across Faults
[First Hit]

2019 AAPG Annual Convention and Exhibition:

Datapages, Inc.Print this page

Uncertainty Analysis in Capillary Controls Across Faults

Abstract

An important fluid-rock interaction is the capillary control on hydrocarbon flow retardation by Previous HitfaultNext Hit rocks formed by the processes of gouge or smear. These capillary controls impact both cross-Previous HitfaultNext Hit flow between juxtaposed reservoirs, and up-Previous HitfaultNext Hit flow for hydrocarbon migration at the reservoir and basin scale. A typical work-flow for evaluating capillary controls on faults cutting siliciclastic rocks is to estimate the clay content from algorithms such as shale gouge ratio or clay smear factor, convert these to capillary threshold pressure, and determine Previous HitfaultNext Hit rock seal capacity. The clay content distribution across the Previous HitfaultNext Hit is determined from the clay in the protolith and the Previous HitfaultNext Hit throw. Uncertainties in this analysis may be introduced by the conversion of the clay content to flow properties, changes in the Previous HitstratigraphicNext Hit model, along-Previous HitfaultNext Hit variation in Previous HitfaultNext Hit geometry and throw, and Previous HitfaultNext Hit rock heterogeneity. Introducing these uncertainties into the analysis, however, is often time consuming and tedious to address in 3D models. The Previous HitstratigraphicNext Hit distribution is generally modeled from local well data, seismic Previous HitstratigraphicNext Hit Previous HitinterpretationNext Hit, and analogues, but the uncertainty in the clay estimates for the range of possible scenarios remains large. An alternative discussed here is running multiple realizations of base-case models of Previous HitstratigraphicNext Hit variation, applying different algorithms for predicting clay content and varying the throw. A range in the fluid properties such as density also defines a range in the predicted free-water level distributions. We define a methodology for the rapid evaluation of these important uncertainties by using multiple realizations based on triangle diagram analysis from single or multiple input wells. The analysis requires only well data and Previous HitfaultTop throw without the constraints of a 3D model. The methodology described results in more efficient calculation of the uncertainties and expected ranges in properties that influence capillary controls on flow.