--> Survey Design Optimization by Data Simulation
[First Hit]

International Conference & Exhibition

Datapages, Inc.Print this page

Survey Design Optimization by Data Simulation

Abstract

Objective The objective of the study is to assess the most suitable acquisition geometry for the forthcoming exploration surveys of KOC which includes the deep Jurassic targets. Procedure Kuwait Oil Company (KOC) conducted a field acquisition and data processing test to evaluate the benefits of Previous HitwideNext Hit Previous HitazimuthNext Hit acquisition in northern Kuwait. Single sensor acquisition and processing was used to record a full Previous HitazimuthNext Hit data set with 6km inline and crossline offsets. From the full offset (6000m) full Previous HitazimuthNext Hit data, several decimated subsets were processed to simulate previously used narrow Previous HitazimuthNext Hit acquisition geometry (1400m) as well as limited offset (4000m) full Previous HitazimuthNext Hit geometry and finally full offset (6000m) full Previous HitazimuthNext Hit with sparser source and receiver line spacing (400m). Following are the original and the simulated geometries: P1 (Original Geometry): Line spacing=200m, Max. Inline Offset=Max. X-line Offset=6000m P2 (Simulated Geometry): Line spacing=200m, Max. Inline Offset=6000m, Max. X-line Offset=1400m P3 (Simulated Geometry): Line spacing=200m, Max. Inline Offset=Max. X-line Offset=4000m P4 (Simulated Geometry): Line spacing=400m, Max. Inline Offset=Max. X-line Offset=6000m The data were processed to maintain independence between the data after the decimation stage. Care was taken to apply surface consistent processes to the decimated data. Results The unmigrated stack for the full offset square patch geometry shows S/N improvement from the high fold but the event continuity is not dramatically different then the narrow Previous HitazimuthNext Hit (P2) data or restricted offset/full Previous HitazimuthNext Hit (P3) data. The pre-migration stack for the full Previous HitazimuthNext Hit data (P1) is lower in vertical resolution then the P2 and P3 data sets due to far offset stretch & poor long offset moveout correction. On unmigrated data, a higher (vertical) resolution stack could result from a tighter stack mute or by applying a residual moveout correction and possibly stretch compensation. The effect of the P1 geometry on multiple attenuation seems marginal at best when compared to the narrow Previous HitazimuthTop geometry (P2) on the unmigrated stack data. Conclusions The observations from the data analysis in terms of resolution, bandwidth, signal to noise ratio, event continuity, and multiple content provided guidance for future survey designs.