--> Abstract: Enhanced Reservoir Definition for Increased Production, by K. J. Weber; #90988 (1993).
[First Hit]

Datapages, Inc.Print this page

WEBER, K. J., Shell International Petroleum Corp., The Hague, The Netherlands

ABSTRACT: Enhanced Previous HitReservoirNext Hit Definition for Increased Production

New production techniques such as the use of horizontal holes for drainage and injection Previous HitpurposesNext Hit, require more detailed and accurate Previous HitreservoirNext Hit characterization. Three main methods have reached an advanced state of application, viz. 3D seismic, computerized Previous HitreservoirNext Hit Previous HitmodelingNext Hit using geostatistical theories and advanced correlation techniques and the use of outcrop data to provide Previous HitreservoirNext Hit analog models.

Of particular importance is the construction of realistic Previous HitreservoirNext Hit models at the earliest opportunity. However, also for old fields, a modern approach with a new phase of data gathering will often reveal hidden reserves and a wide scope for recompletion and infill drilling.

Usually is it the combined use of several methods that is most effective. Probablistic Previous HitreservoirNext Hit Previous HitmodelingNext Hit systems may be very sophisticated, their use is restricted to those environments of deposition for which one possesses a sufficient statistical data base of sand body geometry and interrelationships. Such models can be significantly constrained if sand body contours and pore fill can be detected on seismic sections and amplitude maps. In favorable cases, the irregular present oil-water contacts can be observed in old fields as well as secondary gas caps.

Detailed geological models consisting of millions of cells have to be scaled-up by a factor of hundred to allow Previous HitreservoirNext Hit Previous HitsimulationNext Hit. Various techniques have been developed to achieve this and to compute grid block parameters that properly account for their internal heterogeneity. The detailed geological models can also be used directly for volumetric computations of original oil-in-place in parts of the Previous HitreservoirNext Hit flooded by water or gas. In this way, water saturations revealed by through casing logging in flooded zones can be integrated into the Previous HitreservoirNext Hit model to estimate sweep efficiency and to locate the remaining oil.

Thus the applications of these Previous HitreservoirNext Hit Previous HitmodelingTop techniques range from the early appraisal stage to the late life upgrading of old fields. The economic benefits of these methods are remarkable compared to their cost.

AAPG Search and Discovery Article #90988©1993 AAPG/SVG International Congress and Exhibition, Caracas, Venezuela, March 14-17, 1993.