--> Abstract: Permeability of Naturally Fractured Reservoirs, by L. W. Teufel; #91004 (1991)

Datapages, Inc.Print this page

Permeability of Naturally Fractured Reservoirs

TEUFEL, LAWRENCE W., Sandia National Labs, Albuquerque, NM

Hydraulic fracture stress data collected from carbonate and clastic reservoirs show that the minimum horizontal in situ stress decreases with reservoir depletion and pore pressure drawdown. The reduction in minimum horizontal stress is, in part, a poro-elastic effect that is linear with pore pressure drawdown and can be approximated by an unlaxial compaction model. The observed change in horizontal stress is equal to 40% to 80% of the net change in pore pressure. This type of stress behavior has important implications for reservoir management of naturally fractured reservoirs, because conductivity of fractures is highly stress sensitive. Laboratory studies clearly demonstrate that with increasing effective normal stress fracture apertures close and conductivity decreases. Accordingly, in sharp contrast to the standard procedure, predictions of changes in fracture permeability during reservoir depletion should not be made simply as a function of pore pressure drawdown, but more importantly should be based on how the effective in situ stresses change during drawdown and the orientation of natural fractures relative to the in situ stress field. During drawdown the effective stresses will increase, but at different rates, depending on orientation of the stresses. The increase in the effective overburden stress will be the largest and equal to the magnitude of the pore pressure decline because the overburden stress is constant and does not change with drawdown. However, as a consequence of the minimum horizontal stress decreasing with pore pressure drawdown, the increase i the effective minimum horizontal stress will be much smaller. Accordingly, for a reservoir with several sets of fractures with similar morphology, the reduction in fracture conductivity during drawdown will be greatest for horizontal fractures and least for vertical fractures aligned with the maximum horizontal stress direction. This conclusion is supported by well test and production data.

 

AAPG Search and Discovery Article #91004 © 1991 AAPG Annual Convention Dallas, Texas, April 7-10, 1991 (2009)